Re: fog light replacement

[VWNobby@aol.com]

I had the same problem with my right foglight. It took me an hour or two to remove it. The best thing to do is to find a very small open-end wrench(5mm or 6mm, not sure) and try to wiggle it throught the openings behind the reflector and turn signal (assuming you already removed them). What I had to do, very carefuly, was to hold the wrench in place with one finger while loosening the bolt from the front with a small ratchet. I originaly used a pair of needle nose vice grips, but that got toooo frustrating. It might also help if you can manage to spray some WD-40 on the bolt, mine had some rust and grime on it so the WD-40 help loosen it a bit. Hope this helps.

Norberto
'97 GLX - Black